News DetailCurrent Location £ºHome > News > News Detail
How to choose a standard mold base for an injection mold factory to reduce processing time
- Time£º9/28/2022 Posted£ºHF TECHNOLOGY CO., LIMITED
- Injection molds are customized for different plastic products, but there are many similarities in the structure of injection molds. Therefore, in order to manufacture molds more efficiently, injection mold processing plants have begun to use some standard mold bases. In custom mold opening, injection mold processing plants Different plastic products can be injected only by manufacturing different molding parts, which greatly reduces the processing time of injection molds. So what problems should the injection mold processing factory pay attention to when choosing a standard mold base?
1. The thickness of the mold base and the closing distance of the injection molding machine are different for different models and specifications of the injection molding machine, and the closing distance of the clamping mechanism of different structural forms is also different.
2. The relationship between the opening stroke of the injection mold and the distance between the front and rear dies and the stroke required to eject the part must be clear in the design. The ejection stroke should be greater than the distance between the front and rear dies required to take out the plastic part, and the ejection plastic The distance required for the parts should be less than the rated ejection stroke of the ejector hydraulic cylinder of the injection molding machine.
3. The injection mold processing factory should pay attention to the following matters when installing the standard mold base:
1) The dimensions of the standard mold base should not be affected by the spacing of the tie rods of the injection machine;
2) The positioning aperture and the positioning ring size should be well matched;
3) Whether the position of the ejection mechanism of the injection machine and the stroke of the ejector rod are appropriate;
4) Whether the nozzle aperture and spherical radius match the casting sleeve aperture and spherical groove size of the mold;
5) The position and diameter of the mold base mounting holes should match the corresponding screw holes on the moving template and fixed template of the injection molding machine.